Guides

Mudjacking vs Polyurethane Foam: Which Lift Fits You?

Mudjacking pumps a heavy cement-based slurry under a slab and usually costs less per square foot. Polyurethane foam lifting injects a light expanding foam through smaller holes, cures faster, and usually costs more. The better fit depends on soil, slab size, void size, budget, and how soon you need the slab back.

Both methods raise a sunken slab by filling the void beneath it. Neither one fixes the reason the slab sank, so the cause matters as much as the method.

This guide compares the two on weight, cost, speed, durability, and fit for common projects, and it explains when replacement is the smarter call.

Key Facts
  • Mudjacking: heavy slurry, larger holes, lower price per square foot, and good for large voids and heavy slabs on stable soil.
  • Polyurethane foam: light foam, small holes, faster return to use, higher price per square foot, and good for weak soil and precise lifts.
  • Cost range: published guides put mudjacking at roughly $3 to $9 per square foot and foam at roughly $5 to $25.
  • Fix the cause first: lifting a slab does not correct poor soil or water washout.

Mudjacking vs. Polyurethane Foam: The Short Answer

Choose mudjacking when you have a large, heavy slab on stable soil and cost is the main concern. Choose polyurethane foam when the soil is weak or wet, the lift needs to be precise, the area is small, or you need to use the slab again quickly.

Many jobs could use either method, so the quotes and the contractor’s assessment of your soil often decide it. If you are still diagnosing the problem, start with the guide to sinking concrete repair.

The next sections explain how each method works and where the differences show up in practice.

What Is Mudjacking?

Mudjacking, also called slabjacking, is the pressure injection of a grout or slurry under a settled slab to fill voids and raise it. The FHWA geotechnical manual describes slabjacking as injecting slurry grouts to raise and re-level settled concrete slabs.

The slurry is typically a mix of water, fine sand, portland cement, and often a filler such as limestone, fly ash, or soil. ACI describes injected mortars as containing water, fine sand, portland cement, pozzolanic filler, and an additive for pumpability.

The crew drills holes through the slab in a pattern, pumps slurry through them, watches the slab rise, and then patches the holes with grout. Contractors often use holes about 1.5 to 2.5 inches across.

What Is Polyurethane Foam Lifting?

Polyurethane foam lifting, often called polyjacking, injects a two-part liquid that reacts and expands under the slab. The Oregon DOT research report on injected slab jacking notes that the foam’s volume is several times that of the liquid reactants, and the expansion lifts the slab.

Because the injection holes are small, often around 5/8 inch, the repair leaves less visible patching. The foam also expands into voids and small openings in the soil, which can help stabilize the area.

Highway agencies, including Oregon, Missouri, and Kansas, have reported good success using foam for slab stabilization, according to the FHWA concrete pavement preservation guide.

How mudjacking and polyurethane foam lifting differ Two cross-sections of a sunken slab. In mudjacking, a larger drilled hole is used and a heavy cement-based slurry fills the void under the slab. In polyurethane foam lifting, a much smaller hole is used and a lightweight expanding foam fills the void. Two Ways to Fill the Void and Lift a Slab MudjackinginjectionLarger hole (about 1.5 to 2.5 in. typical)Heavy cement-based slurry Polyurethane foaminjectionSmall hole (about 5/8 in. typical)Light expanding foam Either method lifts the slab. Neither one corrects the soil or the water problem that caused the settlement. Illustrative only, not to scale. Hole sizes and materials vary by contractor and product.

Both methods inject material through drilled holes to fill voids and lift a slab, but the material, weight, and hole size differ.

Mudjacking vs. Polyurethane Foam Side by Side

The two methods differ most in material weight, hole size, cure time, and price. Typical values below come from contractor and equipment-maker literature and published cost guides, so your products and crews may vary.

FeatureMudjackingPolyurethane foam
MaterialCement-based slurry (water, sand, cement, filler)Two-part expanding polyurethane
Typical weightRoughly 100 lb per cubic foot or moreRoughly 2 to 4 lb per cubic foot
Typical hole sizeAbout 1.5 to 2.5 in.About 1/2 to 3/4 in.
Return to serviceOften a day or moreOften minutes to about 30 minutes
Typical costAbout $3 to $9 per ft²About $5 to $25 per ft²
Best atLarge voids, heavy slabs, tight budgetsWeak or wet soil, small precise lifts, fast turnaround
Main concernsAdded weight, washout where water flows, larger patchesHigher cost, over-lift if not controlled, crew skill

Which Method Fits Which Project?

Both methods can raise sunken driveways, walkways, patios, steps, and garage floors, but each has settings where it tends to fit better. Use the table as a starting point, not a rule.

ProjectOften a good fitWhy
Large driveway slabMudjacking or foamMudjacking is often cheaper on big areas; foam helps if the soil is weak
Sidewalk or walkway sectionFoam, or mudjacking on a budgetSmall areas and trip hazards favor precise lifts and small patches
Patio or pool deckFoam, or mudjackingDepends on soil moisture, void size, and visible finish
Steps and stoopsFoamSmall, precise lift and small holes help
Garage floorFoam or mudjackingFaster return to use may matter; slab thickness and moisture matter
Large void or washed-out fillMudjacking, with drainage fixedSlurry fills big volumes at lower cost
Soft or wet soilFoamLighter material adds less load to weak soil

A contractor should explain why they recommend one method for your soil and slab, not just quote a price.

Why Concrete Slabs Sink in the First Place

Slabs sink because the soil or base beneath them moved. The ACI field guide to slabjacking lists improper compaction, drying shrinkage of soil, erosion of the subbase, and flooding as common causes.

Water is the most frequent culprit: roof runoff, poor grading, broken downspouts, and leaking pipes can wash fine soil out from under a slab. Tree roots and expansive clay can also push or pull a slab out of position.

If cracks came with the settlement, see why concrete cracks and how to fix cracked concrete.

Fix the Cause Before You Lift

ACI states that slabjacking levels the slab but does not correct underlying poor soil conditions, so the soil should be evaluated before lifting. If settlement is still occurring, a lifted slab will keep settling.

Fix downspouts, grading, and leaks first, or the same water will remove support again.

For slab drainage, see concrete driveway drainage and how to fix standing water on a concrete patio.

Foundation Warning

If a slab next to a house is sinking because the foundation itself is moving, a lift will not fix it. Have a structural engineer or foundation specialist evaluate it before paying for slab lifting.

CONTRACTOR ESTIMATING PACK

Build a clearer concrete project estimate

Organize concrete quantities, material costs, labor, and job expenses in a downloadable Excel workbook. Use it to prepare a project estimate and track job costs.

One-time purchase · Digital download · Microsoft Excel workbook
XPROJECT ESTIMATE
ITEMQTYAMOUNT
Concrete12 yd³$—
Rebar—$—
Labor—$—
ESTIMATEYOUR PROJECT
Illustrative spreadsheet preview

Material Weight and Soil Conditions

Material weight matters most over weak or recently disturbed soil. ACI notes that the added weight of slabjacking grout plus the slab itself can cause additional soil settlement.

Mudjacking slurry is much heavier than foam, which adds load to soil that already failed once. On firm, stable soil that effect is smaller, and on soft or wet soil it can be the deciding factor.

Foam adds very little weight, which is one reason contractors recommend it over weak, wet, or fill soils. It does not make weak soil stronger by itself.

Hole Size and Surface Disruption

Mudjacking holes are larger and the patches more visible, while foam holes are small and easy to hide. If appearance matters on a stamped, colored, or exposed-aggregate surface, ask how the holes will be patched and matched.

Hole spacing and number also differ. Ask the contractor for the planned hole pattern and who is responsible for patching and cleanup.

If the surface itself is worn rather than sunken, a resurfacing guide may fit better.

Curing Time and Return to Use

Foam often allows traffic within minutes to about 30 minutes, while mudjacking slurry often needs a day or more before heavy use, according to contractor and equipment literature.

Follow the contractor’s written instructions on when to drive or park on the slab. A driveway you need back the same day favors foam, and a patio you can stay off for a couple of days gives mudjacking more room.

Weather matters too. Check the contractor’s guidance for cold temperatures and rain after the lift.

How Much Does Each Method Cost?

Published cost guides put mudjacking at roughly $3 to $9 per square foot and polyurethane foam at roughly $5 to $25 per square foot, installed. Angi lists $3 to $6 for mudjacking and $5 to $25 for polyjacking, and other 2025 to 2026 guides report $4 to $9 and $8 to $25.

MethodPublished range (USD per ft²)Notes
MudjackingAbout $3 to $9Often a third to two-thirds of the foam price for the same job
Polyurethane foamAbout $5 to $25Most guides place typical jobs well above the mudjacking range
Job minimumOften several hundred dollarsSmall jobs can cost more per square foot because of minimums

These are national estimates from consumer cost guides, not guaranteed local prices. Get written quotes for both methods.

Published cost ranges per square foot for mudjacking and polyurethane foam lifting Horizontal range bars. Mudjacking is reported at about 3 to 9 dollars per square foot and polyurethane foam at about 5 to 25 dollars per square foot in published consumer cost guides. Actual prices vary by region and job. Published Installed Cost Ranges (USD per ft²) Mudjacking$3 to $9 Polyurethane foam$5 to $25 $0$6$12$18$24$30 Cost per square foot of slab lifted Ranges from 2025 to 2026 consumer cost guides. Local prices, access, void size, and job minimums change the total.

Foam usually costs more per square foot, but the overlap between the two ranges means your quotes matter more than the averages.

What Drives the Price of a Lift?

Void size, lift height, access, slab thickness, and local labor rates drive the price more than the method name. A small job with a minimum fee can cost more per square foot than a large one.

Example: 10 × 20 ft Driveway Section

Given: a sunken section of 200 ft², using the published ranges above.

Mudjacking: 200 × $3 to $9 = $600 to $1,800.

Foam: 200 × $5 to $25 = $1,000 to $5,000.

What it means: the ranges overlap, so actual quotes decide. These figures are illustrative, not a quote.

Run your own numbers with the mudjacking cost calculator, the polyjacking cost calculator, and the driveway repair cost calculator.

For a broader repair estimate, use the concrete repair cost calculator.

Lifespan and Durability: What the Evidence Shows

There is no controlled long-term study that directly compares mudjacking and foam in residential flatwork, and published lifespan figures come mostly from contractors. Treat claims of 5 to 10 years for mudjacking and 10 to 20 years for foam as marketing estimates, not engineering data.

Highway research gives a more careful picture. In an Oregon DOT research report on injected slab jacking, injected polyurethane raised slabs to the target profile, and the slabs then settled by up to about 0.41 inch over two years, mostly in the first three months.

Lifespan depends on whether the cause was fixed, the soil, the water, the load, and the crew’s work. A well-done lift over fixed drainage lasts. A lift over active washout does not.

Void Filling vs. Lifting

Lifting raises a slab to a target profile, while void filling restores support under a slab that is not meant to move. The two goals call for different control.

The FHWA concrete pavement preservation guide warns that pumping material under a slab where no voids exist can create stress points and speed up deterioration.

The FHWA geotechnical manual cites a Wisconsin study that found foam practical for correcting differential slab settlement but not economical for filling large voids. That is the main reason large voids are often filled with slurry.

How Much Can a Slab Be Lifted at Once?

A slab should be lifted slowly, no more than about 1/4 inch at a time at any one hole. The FHWA concrete pavement preservation guide warns that lifting too much at once creates stress that can crack the slab, and it recommends monitoring with a stringline.

Ask whether the contractor lifts in small increments, uses a laser or string level, and how they handle a slab that is lifted unevenly.

Foam expands quickly, so crew skill is essential for the foam method. Mudjacking can also over-lift.

When Neither Method Works

Neither method works well on a badly cracked or crumbling slab, an active water problem, expansive clay that keeps moving, or a structure that is itself settling.

ConditionWhy lifting struggles
Active washout or leakSupport is removed again after the lift
Soil still settlingThe slab settles again, as ACI warns
Badly cracked or crumbling slabMaterial can leak through cracks or the slab can break
Heaved slab on expansive clayThe slab moved up, not down, so lifting does not apply
Foundation movementNeeds structural evaluation first
Large voids with moving soilMay need soil stabilization or replacement

A contractor who will lift anything without asking about the cause is a warning sign.

When Replacement Is the Better Choice

Replacement is the better choice when the slab is broken beyond repair, the base needs rebuilding, the slab is too thin or deteriorated, or the grade and drainage are wrong. Compare both paths in concrete resurfacing vs. replacement.

To estimate the new slab, use the concrete slab calculator and the concrete slab cost calculator, and see how to pour a concrete slab for the work involved.

If the lift quote approaches the cost of replacement, ask what the repair will and will not fix.

Mudjacking or Foam for Driveways

Driveways are the most common lifting project, and the choice usually comes down to size, soil, and budget. A large driveway on stable soil often favors mudjacking for cost, while weak or wet soil favors foam.

Vehicle loads are also a factor, so ask the contractor how they will check support under the heaviest wheel paths. Fix drainage along the driveway edges first.

The driveway repair cost calculator helps compare lifting with other repairs.

Mudjacking or Foam for Patios, Walkways and Steps

Patios, walkways, and steps are smaller and more visible, so precision and patch appearance matter. Foam’s small holes and precise control often suit these jobs, while mudjacking can still work on larger patios on a budget.

Watch for trip hazards at joints, and check that the lifted slab still drains away from the house. Ask how steps and stoops will be supported after the lift.

Mudjacking or Foam for Garage Floors and Interior Slabs

Garage floors and interior slabs are often lifted with foam because of tighter tolerances and the need to get back in use, but mudjacking is also used. Moisture, slab thickness, and finished flooring all affect the choice.

Cutting holes through interior slabs may be limited by finishes and utilities, so ask about hole locations and how the floor will be patched.

If the settlement is near a foundation wall or involves cracked basement walls, get a structural evaluation before lifting.

Safety and Environmental Considerations

Drilling concrete creates silica dust, and both methods involve drilling, so contractors should control dust in line with OSHA’s silica rules. Slurry and wash water should be contained.

Foam is a polyurethane chemical system. The EPA’s spray polyurethane foam safety guidance explains that isocyanates in uncured spray polyurethane foam can cause health effects and that curing and re-entry guidance comes from the manufacturer.

That guidance is for spray insulation, but the lesson carries over: ask the contractor for the product’s safety data sheet and curing instructions, and keep children and pets away from the work area until they say it is safe.

Can You Lift Concrete Yourself?

Lifting a slab is controlled pressure work, and doing it yourself risks over-lifting, cracking the slab, and missing the cause. Equipment, material mixes, and experience matter.

The ACI field guide to slabjacking stresses determining soil conditions before slabjacking and lifting gradually, which are judgments that experience improves. Small, simple jobs may suit a skilled DIYer, but most homeowners are better off hiring a pro.

If you want to compare against a full replacement, plan it with the slab calculator.

How to Choose a Slab-Lifting Contractor

Pick a contractor who explains the cause of the settlement, offers a written scope, and shows photos or references of similar lifts. Get at least two or three quotes for both methods.

Check that the contractor is licensed where required, carries insurance, and offers written warranty terms. Local requirements vary by state and city.

Be cautious of a contractor who only offers one method for every job, or who skips the soil and drainage questions.

Questions to Ask Before You Hire

These questions help you compare quotes fairly and uncover gaps in the scope.

QuestionWhy it matters
What caused this slab to sink?Shows whether the contractor looked at soil and water
Which method do you recommend and why?Ties the method to your soil and slab
What material and weight will you use?Confirms what goes under the slab
How many holes, what size, and where?Sets expectations for appearance
How will you control and measure the lift?Prevents over-lifting
How will holes be patched and matched?Appearance and cleanup
When can I use the slab?Return-to-service plan
What does the warranty cover?Settlement, cracking, and conditions
What if the slab settles again?Remedy and who pays

What to Expect on Lift Day

A typical lift follows a clear sequence, which you can use to check that the crew is working carefully.

  1. The crew inspects the slab, marks hole locations, and sets a target level.
  2. They drill holes through the slab in a planned pattern.
  3. Material is injected gradually while the lift is monitored with a level or string line.
  4. They stop at the target elevation and avoid lifting more than a small increment at one hole at a time.
  5. The holes are patched, and the surface is cleaned.
  6. You get instructions on when to use the slab, and you recheck the slab after rain and over the next months.

Take before and after measurements so you can document the result and any later settlement.

Common Mistakes When Choosing a Lifting Method

Most poor outcomes come from choosing on price alone, ignoring the cause, or skipping a written scope.

MistakeLikely consequence
Lift without fixing drainageThe slab settles again
Choose by price onlyWrong method for the soil
Mudjack over very weak soilAdded weight causes more settlement
Lift a crumbling slabSlab breaks or material leaks
Ignore patch appearanceVisible hole patches
Skip written scope and warrantyNo recourse if it fails
Treat foundation movement as slab settlementUnderlying problem continues

Mudjacking vs. Foam Decision Checklist

Decision flow for choosing a slab lifting method Start with a settled slab. If the cause is not fixed, fix drainage or soil first. If the slab is badly cracked or crumbling, replace it. If the slab is intact, choose foam when soil is weak or wet, the lift is small or precise, or fast return to use matters, and consider mudjacking for large voids and heavy slabs where budget is the main concern. Then get a contractor assessment. Which Lifting Method? A Decision Flow Slab has settled Is the cause fixed?Drainage, leaks, soil, roots No: fix the cause firstDrainage, leaks, soil support No Yes Is the slab intact?Not crumbling or badly broken No Consider replacementSee the replacement section Yes What matters most? Foam often fitsWeak or wet soil, small precise lift, Mudjacking often fitsLarge voids, heavy slab, Get a written assessment and quote from a contractor

Fix the cause first, confirm the slab is intact, then match the method to soil, void size, budget, and timing.

Use this checklist before you sign a contract.

CheckComplete?
Cause of settlement identified☐
Drainage and leaks corrected☐
Soil conditions discussed with the contractor☐
Slab is intact enough to lift☐
Foundation ruled out as the cause☐
Both methods quoted in writing☐
Lift target and control method explained☐
Hole size, pattern, and patching explained☐
Return-to-service time stated☐
Warranty terms reviewed☐
Replacement cost compared☐

Mudjacking vs. Polyurethane Foam FAQs

Is mudjacking or polyurethane foam better?

Neither is better in every case. Mudjacking usually costs less and suits large voids and heavy slabs on stable soil. Polyurethane foam usually costs more but is lighter, uses smaller holes, and cures faster, which helps on weak soil and small, precise lifts. The right choice depends on your soil, slab, budget, and timing.

How much does mudjacking cost compared to foam?

Published guides put mudjacking at roughly $3 to $9 per square foot and polyurethane foam at roughly $5 to $25 per square foot, installed. Job minimums, access, void size, and local labor rates change the total, so get written quotes for both methods.

Which lasts longer, mudjacking or foam?

No controlled study directly compares them, and most lifespan numbers come from contractors. Longevity depends on whether the cause of settlement was fixed, the soil, water, loads, and workmanship. A lift over fixed drainage and stable soil lasts longer with either method.

Is polyurethane foam lifting safe?

Once cured, polyurethane foam is generally considered relatively inert, but the liquid components contain chemicals such as isocyanates that require careful handling. Ask the contractor for the product’s safety data sheet and curing guidance, follow their instructions, and keep children and pets away from the work area until they say it is safe.

How much weight does mudjacking add?

Mudjacking slurry is often described as roughly 100 pounds per cubic foot or more, compared with about 2 to 4 pounds for foam. That extra weight can add load to weak or wet soil, so ask the contractor how they account for it on your site.

How long before I can drive on a lifted slab?

Foam is often ready for traffic within minutes to about 30 minutes, while mudjacking often needs a day or more. Follow your contractor’s written instructions, since cure time varies with the product, the temperature, and the load.

Can you lift a cracked concrete slab?

Sometimes, if the slab is intact enough to stay together under the lift. A badly cracked or crumbling slab may break or let material leak through, and replacement may be a better choice. Have the contractor explain the risks before you commit.

Will the slab sink again after lifting?

It can if the cause remains. ACI notes that slabjacking will not correct poor soil conditions, and a slab over soil that is still settling will settle again. Fix drainage, leaks, and soil support first, and ask what the warranty covers.

Can mudjacking or foam fix a sinking house foundation?

No. These methods are for flatwork such as driveways, patios, and sidewalks. If a house foundation is settling, have a structural engineer or foundation specialist evaluate it, because lifting a nearby slab does not address foundation movement.

How much can a slab be lifted at once?

Lifting should be gradual, generally no more than about 1/4 inch at a time at any one hole, according to FHWA guidance. Lifting too much at once creates stress that can crack the slab, so ask how the contractor controls and measures the lift.

Is lifting cheaper than replacing a slab?

Often, but not always. Lifting usually costs less than tearing out and pouring a new slab when the slab is intact and the cause is fixed. If the slab is badly broken, or the base must be rebuilt, replacement may be the better value.

Do I need a permit for slab lifting?

Requirements vary by city and county. Some jurisdictions require permits for work near foundations or utilities, while simple flatwork repairs may not. Ask your contractor and check with your local building department before the work starts.

Can I mudjack or foam-lift a slab myself?

Small, simple jobs may suit an experienced DIYer, but lifting is controlled pressure work that can over-lift and crack a slab. It also requires diagnosing the cause of settlement. Most homeowners get better results from a qualified contractor.

How do I choose between mudjacking and polyurethane foam?

Start with the cause and the soil, then weigh slab size, void size, budget, and how soon you need the slab back. Get written quotes for both and ask each contractor to explain why they recommend their method for your site.

Choosing between mudjacking and polyurethane foam starts with the cause of the settlement, not the price list. Fix the water and soil problem, confirm the slab is intact, then match the method to your soil, void size, budget, and timeline.

Get written quotes for both methods, and compare them against replacement before you decide.

Estimate Your Lift

Compare the cost of lifting a sunken slab with the cost of replacing it.

Use the Polyjacking Cost Calculator

Related Articles