Concrete Cost Calculator New Jersey: Slab, Driveway & Footing Pricing
Estimate ready-mix concrete cost for your New Jersey project by region, PSI strength, and project type. This calculator applies New Jersey's 36-inch frost depth guidance under N.J.A.C. 5:23 and current metro-level pricing so your estimate reflects local delivery and labor conditions, not a flat national average.
💰 Estimate Your Project Cost
Get accurate cost estimates before calling a contractor — compare prices and plan your budget.
Concrete Prices 2026 Chart
Current concrete prices per yard, per sq ft, and per bag — updated for 2026 with regional cost breakdowns.
View Chart →New Jersey Concrete Prices at a Glance
These figures reflect metro-level ready-mix pricing gathered from New Jersey cost research published in 2026 (AceCalc New Jersey Concrete Prices, 2026; ProMatcher NJ Concrete Cost Report).
| Metro Area | Price per Cubic Yard | vs. State Average |
|---|---|---|
| Jersey City | $217.80 | +10% |
| Newark | $207.90 | +5% |
| Paterson | $198.00 | Average |
| Atlantic City | $198.00 | Average |
| Trenton | $188.10 | -5% |
New Jersey's statewide average of roughly $198 per cubic yard runs about 20% above the national midpoint of $165 per cubic yard as of 2026.
Why New Jersey Concrete Costs More
Three factors push New Jersey pricing above most neighboring states. First, the NJ Uniform Construction Code requires a 36-inch minimum footing depth under N.J.A.C. 5:23, well past the 12-inch default many southern states use under IRC §R403.1.4.1. That alone adds 25 to 40 percent more concrete volume to a typical perimeter footing.
Second, Bergen, Hudson, and Essex county pricing tracks close to New York City rates due to shared labor markets and delivery logistics. Third, shore communities face additional CAFRA coastal zone requirements from the NJ DEP and FEMA, often requiring elevated foundations that increase both material and labor cost.
Sample Calculations
10 ft x 20 ft Driveway, 5 in Thick, Central NJ
Dimensions: 10 ft x 20 ft x 5 in
PSI: 4,000 (standard exterior)
Waste factor: 10%
Volume = 10 x 20 x (5/12) = 83.33 ft³
83.33 / 27 = 3.09 yd³ raw
3.09 x 1.10 waste = 3.40 yd³ gross
3.40 x $198/yd³ ≈ $673 material
Adding contractor labor at $7.50/sq ft (200 sq ft) brings the installed total closer to $2,180, consistent with Central NJ contractor rates.
40 ft Perimeter Footing, 36 in Depth, Northern NJ
Length: 40 ft, Width: 16 in, Depth: 36 in (NJ frost minimum)
PSI: 4,000
Width ft = 16/12 = 1.33 ft; Depth ft = 36/12 = 3.0 ft
Volume = 40 x 1.33 x 3.0 = 160 ft³
160 / 27 = 5.93 yd³
5.93 x $207.90/yd³ ≈ $1,233 material (Newark pricing)
Compare this to a 12-inch footing in a warmer state: only 1.98 yd³ would be needed, showing how NJ's frost code roughly triples footing volume.
Forgetting the Waste Factor on a Small Patio
12 ft x 12 ft patio, 4 in thick, no waste factor applied
Volume = 12 x 12 x (4/12) = 48 ft³ = 1.78 yd³
Ordering exactly 1.78 yd³ often triggers a short-load fee
Adding 10% waste brings the order to 1.96 yd³, still under most plants' 7 yd³ minimum
Small pours under 7 cubic yards routinely trigger a short-load surcharge of $75-$100 in New Jersey; combining with a neighboring job can help avoid it.
Common Estimating Mistakes
- Using national average pricing instead of NJ metro pricing: New Jersey runs about 20% above the national midpoint, so a generic $165/yd³ estimate underquotes most NJ projects.
- Applying the wrong footing depth: Many online calculators default to a 12-inch footing depth from IRC tables built for warmer climates, when New Jersey requires 36 inches under N.J.A.C. 5:23.
- Skipping the short-load fee: Orders under roughly 7 cubic yards commonly trigger a $75-$100 short-load surcharge from NJ ready-mix plants.
- Ignoring coastal CAFRA requirements: Shore-zone projects under FEMA A-zone or V-zone rules often need elevated foundations, adding cost that inland calculators do not account for.
- Forgetting seasonal additive cost: Winter pours (Dec-Mar) need cold-weather additives and blanket protection, which most flat-rate estimates omit entirely.
Delivery, Permits, and Code Notes for New Jersey
Most New Jersey municipalities require a permit for structural slabs, driveways over a set size, and any footing work under the NJ Uniform Construction Code, with fees typically running $75 to $350 depending on township. Ready-mix plants generally include the first 10 miles of haul distance in the base delivery fee, then charge a per-mile surcharge beyond that radius.
Construction season runs April through November across most of the state, with shore communities seeing demand spikes ahead of Memorial Day. Ordering in the off-peak window, particularly late fall, typically saves 5 to 15 percent versus spring and summer peak pricing.
Frequently Asked Questions
Ready-mix concrete in New Jersey runs roughly $188 to $218 per cubic yard for material depending on metro area, about 20% above the national midpoint of $165 per yard as of 2026 (AceCalc New Jersey Concrete Prices, 2026). Jersey City and Newark price at the high end due to NYC-metro proximity, while Trenton runs lower.
New Jersey requires a 36-inch minimum footing depth under N.J.A.C. 5:23, well beyond the IRC default of 12 inches used in many southern states. That adds 25 to 40 percent more concrete volume to a typical perimeter footing, plus Bergen, Hudson, and Essex county pricing tracks close to NYC rates.
New Jersey's frost line runs 30 to 36 inches statewide per the NJ Uniform Construction Code subcode, with 36 inches used as the standard footing depth on most residential projects. This is deeper than IRC §R403.1.4.1's default table for warmer climates.
Residential driveways in New Jersey are typically poured 4 to 6 inches thick, with 5 to 6 inches recommended where trucks or heavy vehicles will park, consistent with ACI 330R guidance for slabs-on-grade subject to vehicle loads.
Yes. Shore communities under FEMA and NJ DEP CAFRA coastal A-zone and V-zone rules often require elevated foundations, which increase both concrete volume and labor cost compared to inland slab-on-grade construction.
Ready-mix demand peaks May through July in New Jersey. Ordering in the off-peak window, particularly late fall before winter shutdown, typically saves 5 to 15 percent versus spring and summer peak pricing (AceCalc New Jersey Concrete Prices, 2026).
Most structural slabs, driveways over a certain size, and any footing work require a permit under the NJ Uniform Construction Code, with municipal fees typically ranging from $75 to $350 or more. Check with your local construction office before pouring.
Sources & Methodology
- New Jersey Uniform Construction Code, footing depth requirements — N.J.A.C. 5:23 View regulation
- International Residential Code 2021, §R403.1.4.1, frost-protected footing default depth View NJ Residential Chapter 4
- ACI 318-19, §19.3.3, exposure class and air entrainment requirements for exterior flatwork
- AceCalc, "Concrete Prices in New Jersey 2026" — metro pricing and state average View source
- ProMatcher, "New Jersey Concrete Costs & Prices Report" View source
- HomeBlue, Jersey City concrete slab cost report, per-square-foot and per-yard ranges View source
Built by Muhammad Ramzan Babar, physics researcher (PhD candidate). Reviewed by site author. Calculations run entirely in your browser; no project data is stored or transmitted. Last reviewed: July 2026.
Unlock Your Complete Results
Your calculation is ready. Enter your email to unlock:
- ✔ Download a printable PDF estimate
- ✔ Get 2026 US concrete material prices
- ✔ Save your project calculations instantly
- ✔ Access contractor cost-saving tips